Wednesday 1 July 2015

Review SBX33 Strelkovy Battalion (Plastic)

Morning all, Winner Dave here with a review of the new plastic Strelkovy Battalion.

This is my first box of plastic infantry so, I was expecting great things from what I'd read of other plastic infantry reviews.
Let's see what we get, inside the box are 6 sprues, and each sprue has 24 dudes in total or 25 bits as the HMG gunner comes in two halves.  So in total you get 144 soldiers, which is enough to make 4 platoons of 7 stands, 3 HMG bases and a command stand or 2.

I found taking the guys off the sprue easy and only broke one of them at the foot, which was easily rectified.  Clean up was super easy, which is good because clean up is my least favourite part of the hobby.  I pretty much just cleaned the helmets up and a line of flash on the commanders.

Now, I must confess I made a boo boo here.  I actually thought there were doubles of a particular pose on each sprue.  So that you got 6 soldiers looking like this and 12 looking like that.  It turns out I didn't look closely enough and each pose is unique, but some are similar...you'll see what I mean.

Here's a photo of the lot...phew that's a lot of toy soldiers...

Sorry about the table runner.  My great plan had been to paint one of each pose for the review as I knew I wouldn't get the lot painted, but well you'll see.
These are the guys I thought there were 12 of, but there's 6 of each

There's 6 of these, which look similar to the above photo...sorry
HMG is cool
Two poses of LMG
Pointers and Wavers
Advancing at various rates
Grenade dude and obligatory kneeling shooting dude
A Boss and a Commissar
So, I doubt you're going to need 6 Commissars, perhaps just 2 or 3, but maybe there's some funky objectives they could be integrated into.

Hopefully the detail speaks for itself, I love the pockets and how very clear all the straps and pouches are.  I'm usually lucky to get a handful of metal ones as clearly cast as these.  Plastic does have its drawbacks, you can often get a hard bit of plastic inbetween areas like the gun and the arm, which are impossible to remove and leave you wondering how to paint it.  On the whole this was rare, with only 2 poses really suffering from additional plastic syndrome (IIRC).

I find paint rubs off the plastic quite easily, which surprised me, I thought I suffer less of this than with metal.  I had to repaint all of the helmets as my fingers had rubbed paint off very easily, so some careful varnishing is called for.  That said, when I drop them, the plastic fair far far better than their metal counter parts.

I'll certainly miss the weight and overall feel of the metal minis...especially when you get a really good batch.  At their best I think I prefer metal figs (My Japanese and Great War Brits for example), but on average plastic wins.

Back to this particular boxset, I'm really pleased with them, the detail is sharp the poses are quite good, maybe a little static but the amount in a box seems very very good value to me.  I hope in the future there is an SMG armed battalion and some panzer faust armed guys would be most welcome...along with a couple of flame throwers.

Thanks for reading

WinnerDave

17 comments:

  1. Great review, Dave. I am firmly in the plastic camp myself. I really like some of those poses.

    ReplyDelete
    Replies
    1. Did you notice any difference from painting metal?
      I like how robust the plastic ones are...but I kinda miss the feel of the metal ones.

      Delete
    2. Ha-ha. I care nothing for feel. Hahaha.

      I find it way easier to paint the more defined detail on plastics. On metal models I kind of make up the detail when I am painting. Compare the difference in the detail sculpted on the faces.

      It is too bad they didn't include some smgs and flamethrowers and things so they could be used as more different types of lw Soviet infantry.

      Delete
  2. The Koms will be useful in MW .

    ReplyDelete
    Replies
    1. Good point well made, I got a bit single minded thinking about LW with all the new books and all.

      Delete
  3. If paint is rubbing off, try a different primer. What primer did you use?

    ReplyDelete
    Replies
    1. Vallejo Surface Primer.
      Apparently Ammo's primer is very good, which I must try out some time, but my vallejo bottles are pretty full, so may be some time yet.
      That'll make for a good test though, thank Nick

      Delete
    2. How long did you let it dry for? It really needs an over night curing to set that stuff.

      Delete
  4. The two poses are LMG's. A SMG is shown in the pointers and wavers.

    ReplyDelete
    Replies
    1. Yip yip, my bad (as a person 10-15 years younger might have once said.).

      Delete
  5. Nice! if you chop the Kommisars megaphone off you get another officer pose

    ReplyDelete
    Replies
    1. Or turn it on it's end and make either an Olympic torch or a giant ice cream :)

      Delete
    2. Ahhhh!!! Icecream.... :-)

      Delete
  6. Awesome review cant wait to do some my self.

    ReplyDelete
    Replies
    1. Sorry ment to put my question in.
      How do you like to finish the figures.

      Delete
    2. I quite like satin varnish as my go to varnish of choice. However, that does depend on which varnish I pick up first and if I can be bothered to put down the Matt varnish and and continue riffling through my draw for the satin.

      Is that what you meant or were you thinking basing-wise?

      Delete
    3. Yes that is what I meant thank you.
      I just got into flames of war and am picking up tips. :)

      Delete